+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Products » Flow Measuring Instrument » Electromagnetic Flow Meter » In Line Magnetic Flow Meter

In Line Magnetic Flow Meter

Share to:
  • In-line mag flow sensor from DN15 to DN2000
  • Obviously advantage for fluids with solids, particles, slurry, or suspended dirt
  • High accuracy flow meter: 0.5% or 0.25%
  • No pressure loss
  • No moving parts for long time use and little maintenance work needed
  • EM flow meter has Hart or MODBUS RTU options
Availability:
Quantity:


In Line Magnetic Flow Meter introduction

The inline or in-line flow meter includes a flow body installed more permanently in a process line. One of the in-line meter advantages is that it does not require as much of a straight run as the insertion-style meter. This meter configuration has a built-in flow conditioner that optimizes the flow profile of the process gas. This allows the end-user to cut down the length of the upstream straight run to three pipe diameters, in most cases.


In Line Magnetic Flow Meter Features


            

    • Easy maintenance due to no moving parts.

    • Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.

    • Uninfluenced by temperature, pressure, viscosity, and density.

    • Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.

    • High turndown ratio up to 1:100.

    • It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.

    • Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit.

    • Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.

    • Lining and electrode available in various materials which can measure nearly all conductive fluids.

    • It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.

    • The power supply system has good voltage vibration ability.

    • Meters batching and blending totalization.

In Line Magnetic Flow Meter specification



Accuracy
±0.5%, ±0.3% Optional
Repeatability
0.15%
Ambient TemperatureSensor (Remote Type)-4 °F to 158 °F (-20 °C to +70 °C)

Converter-4 °F to 158 °F (-20 °C to +70 °C)

Integral Type14 °F to 122 °F (-10 °C to +50 °C)
Humidity
5% to 95% RH (no frost)
Vibration Frequency
55Hz
Amplitude
0.55mm
Ambient Magnetic Field
≤400A/m
Fluid TemperatureDirect Mount
≤176°F (80°C)

Separate TypeRubber Lining≤176°F (80°C)


PTFE Lining≤248°F (120°C)
Nominal Pressure
Limited to Flange Rating
Power Supply
18 to 36VDC, 85 to 220VAC
Enclosure
IP65
Output Signal
Pulse and 4 to 20 mA
Digital Communication
Modbus, RS485 or HART
Electrode Material
316SS or Hastelloy C and Specials
Lining Material
PTFE or Hard Rubber
Flange Material
Carbon Steel, Stainless Steel and Specials
Measuring Tube Material
Stainless Steel, Hastelloy C and Specials



-Manuals

In Line Magnetic Flow Meter

-Data sheet


In Line Magnetic Flow Meter Application

HVAC hydronic applications including chilled water, heating hot water and condenser water • Bi-directional flow for primary/secondary bypass and thermal storage applications • Domestic cold and hot water applications • Clean process flow applications with conductivities greater than 5 µS/cm


Previous: 
Next: