+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Products » Flow Measuring Instrument » Electromagnetic Flow Meter » Yokogawa ADMAG SE Series Magnetic Flow Meters

Yokogawa ADMAG SE Series Magnetic Flow Meters

Share to:
  • Ambient temperature: -20~60℃
  • Rated value of power supply voltage:
  • 220V Ac type: 200~240VAC (range 180-264VAc)
  • 24VDC type: DC 24V DC
  • Power frequency: 47~63Hz
Availability:
Quantity:
  • ADMAG SE
  • Yokogawa

Yokogawa ADMAG SE Series Magnetic Flow Meters Introduction

 ADMAG SE is the Safe and Easy magnetic flow meter which makes your job simple and effective. You will increase the productivity and profitability. The installation, operation, and maintenance are all safe and easy.

ADMAG SE is equipped with a dual compartment housing providing ease of wiring while isolating the electronics from the environment. It is also prepared with HART or BRAIN communication as standard and its light weight makes installation easy.

Yokogawa ADMAG SE Series Magnetic Flow Meters Feature

High Reliability

  • Based on Field Proven Technology

  • Proven Construction

  • Long Term Durability

Compliance to World Market Requirements

  • General Safety

  • CE mark, C -Tick mark

  • Explosion Proof

  • ISO Standard

High Accuracy (0.5% of flow rate)
Easy Operation and Maintenance

  • Parameter Setting with Touch Control

  • Self Diagnostics

  • Light Weight and Easy Installation

  • Face to Face Length conform to ISO Standard (Flange Type)

Easily Visible Display

  • The Large Visible LCD Panel

Communication Capability

  • HART or BRAIN as standard

Cost-effective
     Note : HART is a registered trademark of the HART Communication Foundation .


Yokogawa ADMAG SE Series Magnetic Flow Meters specification

Diameter: 15, 25, 40, 50, 80, 100, 150, 200 mm

· Excitation mode: Pulse DC excitation

· Lining: PFA or FEP

· Conductivity:  5 μs / cm

· Velocity range: 0 ~10 m/ s

· Accuracy: ±0.5% of the indicated value

· Repeatability: 0.2% of indicated value

· Medium temperature:-10 ~ +130 ℃

· Ambient temperature:-20 ~ +60 ℃

· Power supply voltage: 220 VAC

· Fluid pressure:-0.1 ~ 4.0 Mpa

Output signal: analog 4 ~ 20 mA, pulse, alarm

· Communication: (optional) BRAIN communication

· Power consumption:  10 W (including sensor and converter)

· Can provide general type and explosion-proof type

Basic performance index

· Accuracy: ±0.5%

· Power consumption:  10 W (including sensor and converter)

· Insulation resistance: At 500 V DC, the insulation resistance between the power supply and the ground terminal is 100 MΩ.

· At 500 V DC, the insulation resistance between the power supply and each output terminal is 100 MΩ.

· Insulation strength: 1500 V AC (1 minute resistance between power and ground)

Standards required for safety: IEC 1010, EN61010

1. Divided by size: 2600~2.5mm in diameter, and can be designed and manufactured according to customer requirements. Can meet the special requirements of customers.

2. Distinguish by connection mode: flange connection type and clamping type.

3. According to the converter: there are integrated type and separate type.

4. Distinguish by special purpose: diving type and flameproof intrinsically safe type, etc.


-Manuals

Yokogawa ADMAG SE Series Magnetic Flow Meters

-Data sheet


Previous: 
Next: