About Us | News | Download | Contact Us
Availability: | |
---|---|
Quantity: | |
Pneumatic high-pressure controller always provides a suitable calibration solution on account of its accuracy class. Its outstanding control performance is particularly impressive thanks to special valve technology and the high-accuracy pressure sensor as a measuring unit. With this the controller is suitable as a factory or working standard for the testing or calibration of any type of pressure measuring instrument.
It is available as a desktop instrument or as a 19" rack-mounting kit. The sensors can be changed via the front, without having to take out the complete controller, e.g. out of a calibration rig (plug-and-play).
Industry-first automated controller for air-driven hydraulic pumps
Automated pressure control for hydrostatic test benches
Controls up to three different pumps simultaneously - pump 1 fill (on/off), pump 2 pressure control and pump 3 pressure control
Pressure cycle testing allows for multiple pressure cycles on a part from low to high pressure
Plug'n play upgrade for any pneumatic intensifier pump
Five pressure classes: 10,000 psi | 25,000 psi | 40,000 psi | 60,000 psi | 75,000 psi
Automated test certification reports
Easy-to-use touch screen interface
Simply setup test, hit start and walk away
Highly accurate
Control for a Dump Valve and Isolation Valve
FTP functionality allows PC to pull files from controller
Pressure alarm
Pneumatic high-pressure controller always provides a suitable calibration solution on account of its accuracy class. Its outstanding control performance is particularly impressive thanks to special valve technology and the high-accuracy pressure sensor as a measuring unit. With this the controller is suitable as a factory or working standard for the testing or calibration of any type of pressure measuring instrument.
It is available as a desktop instrument or as a 19" rack-mounting kit. The sensors can be changed via the front, without having to take out the complete controller, e.g. out of a calibration rig (plug-and-play).
Industry-first automated controller for air-driven hydraulic pumps
Automated pressure control for hydrostatic test benches
Controls up to three different pumps simultaneously - pump 1 fill (on/off), pump 2 pressure control and pump 3 pressure control
Pressure cycle testing allows for multiple pressure cycles on a part from low to high pressure
Plug'n play upgrade for any pneumatic intensifier pump
Five pressure classes: 10,000 psi | 25,000 psi | 40,000 psi | 60,000 psi | 75,000 psi
Automated test certification reports
Easy-to-use touch screen interface
Simply setup test, hit start and walk away
Highly accurate
Control for a Dump Valve and Isolation Valve
FTP functionality allows PC to pull files from controller
Pressure alarm
Standard Pressure Ranges (FS, bara) | 6000, 10,000 psia (415, 700 bara) |
Tare Mode | Tare mode included for gauge calibrations |
Display | TFT, VGA, active matrix, 6.4 in (162.5 mm) 640 x 480 resolution, 65,000 colors |
Electrical Power | 110 or 220 VAC (±18%), 50/60 Hz, single phase |
Operating Temperature | 41°F to 122°F (5°C to 50°C) |
Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
Humidity | 5 to 95% relative humidity, non-condensing |
Dimensions (h x w x d) | 17 in x 19 in x 24 in (43 cm x 49 cm x 61 cm) |
Weight | 120 lb (54.5 kg) |
Performance | |
Precision | 0.01% of range; to 10,000 psi (700 bar) |
Stability | 0.01% of range, per year |
Control Stability | 0.007% maximum FS for load volume 3 to 35 in3 (7.5 to 89 cm3); control low limit is 10% of maximum FS pressure |
Warm Up Time | 30 minutes, may be left on indefinitely |
Pressure Medium | Dry, clean air or nitrogen |
Supply Pressure | 10% above FS pressure range (may require optional external gas booster system), 100 to 110 psi (7 to 7.5 bar) industrial grade (shop) air for controller operation |
Pneumatics | |
Pneumatics Ports | Test port: 1/8 in NPT Supply pressure port: 1/8 in NPT Air supply: 1/4 in NPT |
Overpressure Protection | Test port relief valve set at 110% FS Gas supply port set at 120% FS Software limits (set by user) |
Communications | |
Communications | RS232 and IEEE-488 Syntax: SCPI Fluke Calibration Series 6000 and Druck DPI 510 emulation |
Drivers | LabVIEW driver available MET/CAL® driver available Intecal software available |
Calibration | |
Calibration | A calibration report providing traceability to the National Institute of Standards and Technology (NIST) is provided with each instrument. NVLAP accredited calibration to ISO 17025 is available as an option. Recommended calibration interval is one year. |
Standard Pressure Ranges (FS, bara) | 6000, 10,000 psia (415, 700 bara) |
Tare Mode | Tare mode included for gauge calibrations |
Display | TFT, VGA, active matrix, 6.4 in (162.5 mm) 640 x 480 resolution, 65,000 colors |
Electrical Power | 110 or 220 VAC (±18%), 50/60 Hz, single phase |
Operating Temperature | 41°F to 122°F (5°C to 50°C) |
Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
Humidity | 5 to 95% relative humidity, non-condensing |
Dimensions (h x w x d) | 17 in x 19 in x 24 in (43 cm x 49 cm x 61 cm) |
Weight | 120 lb (54.5 kg) |
Performance | |
Precision | 0.01% of range; to 10,000 psi (700 bar) |
Stability | 0.01% of range, per year |
Control Stability | 0.007% maximum FS for load volume 3 to 35 in3 (7.5 to 89 cm3); control low limit is 10% of maximum FS pressure |
Warm Up Time | 30 minutes, may be left on indefinitely |
Pressure Medium | Dry, clean air or nitrogen |
Supply Pressure | 10% above FS pressure range (may require optional external gas booster system), 100 to 110 psi (7 to 7.5 bar) industrial grade (shop) air for controller operation |
Pneumatics | |
Pneumatics Ports | Test port: 1/8 in NPT Supply pressure port: 1/8 in NPT Air supply: 1/4 in NPT |
Overpressure Protection | Test port relief valve set at 110% FS Gas supply port set at 120% FS Software limits (set by user) |
Communications | |
Communications | RS232 and IEEE-488 Syntax: SCPI Fluke Calibration Series 6000 and Druck DPI 510 emulation |
Drivers | LabVIEW driver available MET/CAL® driver available Intecal software available |
Calibration | |
Calibration | A calibration report providing traceability to the National Institute of Standards and Technology (NIST) is provided with each instrument. NVLAP accredited calibration to ISO 17025 is available as an option. Recommended calibration interval is one year. |
-Manuals
Pneumatic High Pressure Controller
-Data sheet
-Manuals
Pneumatic High Pressure Controller
-Data sheet
Automotive and avionics industry
Industry (laboratory, workshop and production)
Transmitter and pressure gauge manufacturers
Calibration service companies and service industry
Research and development laboratories
Automotive and avionics industry
Industry (laboratory, workshop and production)
Transmitter and pressure gauge manufacturers
Calibration service companies and service industry
Research and development laboratories