External clip type installation, no need to cut pipe. This is very different from traditional traffic devices. Users only need to clamp the flow sensor on the pipe surface. Then the ultrasonic flowmeter can detect the flow through the ultrasonic, and automatically calculate the flow rate value, flow accumulator, etc.

Ultrasonic flowmeter is a non-contact instrument, which can not only measure the medium flow of large pipe diameter, but also measure the medium that is not easy to contact and observe. Its measurement accuracy is very high. The external clip installation can reach the highest accuracy of ± 0.5%, and it is almost free from the interference of various parameters of the measured medium. In particular, it can solve the flow measurement problems of highly corrosive, non-conductive, radioactive, flammable and explosive media that other instruments cannot.

The external clamp type or pipe section type ultrasonic flow meter is an instrument that measures the liquid flow in the pipe based on the principle of "velocity difference method". It adopts advanced multi pulse technology, digital signal processing technology and error correction technology, so that the flow meter can adapt to the environment of industrial site more easily, economically and accurately.

Therefore, the selection of gas analysis instruments (systems) is very important, and some companies are negligent or cheap when selecting models, which may cause problems in the selection.

Due to the wide variety of gases being analyzed and the variety of analysis principles, there are many types of gas analysis instruments.

The mechanical pressure switch is a purely mechanical deformation that causes the micro switch to act. When the pressure increases, the different sensing pressure components will be deformed, and will move upwards.

When choosing a digital pressure gauge, it should be clear that the measured pressure is: negative pressure/compound, micro pressure, conventional, ultra-high pressure.

The digital pressure gauge​ combines the world's leading microprocessor technology and advanced analog-to-digital conversion algorithm to meet the requirements of high precision and low power consumption.

The gas turbine flowmeter is a precision measuring instrument and must be handled carefully during transportation, storage and operation.

As an important part of the manufacturing industry, the instrument industry is closely related to the environment, various engineering construction, and scientific and technological research. At the same time, the instrument person also bears more responsibilities.

The industrial automation instrumentation industry is the basic industry of modern industry, providing basic components for the pillar industries of the national economy such as metallurgy, non-ferrous metals, chemicals, etc.

Valves are the basic components of the pipeline system and occupy a very important position in the machinery industry. They are widely used in a wide range of applications.