+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Brands » Yokogawa » Yokogawa Temperature Transmitters » Yokogawa YTA110 Temperature Transmitter

Yokogawa YTA110 Temperature Transmitter

Share to:
  • 0.065% Accuracy
  • 0.1% Stability per 5 years
  • 2,300 psi MWP
Availability:
Quantity:
  • YTA110
  • Yokogawa

Yokogawa YTA110 Temperature Transmitter Introduction

The YTA110 is the high performance temperature transmitter that accepts Thermocouple, RTD, ohms or DC milivolts inputs and converts it to a 4 to 20 mA DC signal for transmission. The YTA110 supports either BRAIN or HART communication protocol.

The YTA110 is the high performance field-mount temperature transmitter that accepts a single sensor input. This input can be from a RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20mA DC analog signal. The YTA110 supports either BRAIN or HART® 5 digital communication protocol. The YTA110 is the choice for control and safety applications.

Yokogawa YTA110 Temperature Transmitter Feature


  • Outstanding performance
    Microprocessor-based sensing technology ensures high accuracy and stability. 

  • High reliability
    Dual-compartment housing realizes high resistance capability to harsh environments. 

  • SIL Certification
    YTA series temperature transmitters have been certified by TÜV NORD as being compliant with the requirements of the IEC61508 for SIL 2. 

  • Variety of sensor inputs
    The type of sensor input is user-selectable: thermocouples, RTDs, ohms, or DC milivolt. 

  • Digital communication
    The BRAIN and HART communication protocols are available.
    The instrument configuration can be changed by the user with a BT200 terminal or HART communicator. 
    The YTA320 temperature transmitter also supports FOUNDATION fieldbus communication protocol. 

Yokogawa YTA110 Temperature Transmitter specification

Accuracy (typical)

YTA110: ±0.1% of span

Cold junction Compensation accuracy

(For T/C only)
±0.5 deg C (0.9 deg F)

Power supply effect

±0.005% of calibration span per volt

Ambient temperature effect

±0.1%/10 deg C (YTA110)

Input signal

YTA110: single input
Input type is selectable: thermocouples, 2-, 3-, and 4-wire RTDs, ohm and DC milivolt

Output

Two wire 4 to 20 mA DC or FOUNDATION fieldbus signal (YTA320)

Supply voltage

BRAIN and HART: 10.5 to 42 V DC
(10.5 to 30 V DC for Intrinsically safe type)
Fieldbus: 9 to 32 V DC
(9 to 24 V DC for Entity and 9 to 17.5 V DC for FISCO)

Ambient temperature

Option code may affect limits
-40 to 85 deg C (-40 to 185 deg F)
-30 to 80 deg C (-22 to 176 deg F) with integral indicator

Mounting

Optional mounting bracket can be used either for two-inch pipe or flat panel mounting.

Weight

1.2 kg (2.6lb) without integral indicator and mounting bracket. Integral indicator weighs 0.2kg (0.4lb).

Degrees of protection

IP66, IP67 and NEMA 4X

Certificates

CENELEC, CSA, FM, IECEx or TIIS

SIL Certificate

Certified by TÜV NORD in compliance with the IEC61508 SIL 2 capability f


-Manuals

Yokogawa YTA110 Temperature Transmitter

-Data sheet

YTA110.pdf


Previous: 
Next: