Online non-interruptive (transparent) communication
The modulated communication signal does not interrupt the 4 to 20 mA DC signals on the communications loop.
This loop functions automatically while the terminal is online.
Diagnostics/ security with error messages In addition to the terminal’s self-check functions, there is a code entry function that helps maintain the integrity of important setup data.
Built-in thermal printer
This option enables on-the-spot printouts of tag numbers, calibrations, configurations, and more.
Customers will appreciate the ability to print out quality assurance and ISO 9000 documentation.
As a portable terminal, the Model BT200 BRAIN TERMI-NAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode,and range, through simultaneous communication. It also monitors I/O values and self-check results, sets constant- current output , and allows zero adjustments.
The Model BT200 BRAIN TERMINAL is used by connecting it between 4 to 20 mA DC signal transmission lines of the equipment or to a dedicated connector on the ESC (Signal Conditioner Communication Card) when the system is started up or maintained.
Device Smart Communicator BT200 Feature
1.Online monitoring and communication
The modulated communication signal does not interrupt the 4 to 20 mA DC signals during communication.
2. Common to all Yokogawa’s equipment
The Model BT200 BRAIN TERMINAL works with allequipment that uses BRAIN communication.
3. Easy of use
A large display (21 characters by 8 lines) eases setup andalteration procedures in English prompting interactive
sequences.
4. Diagnostics/security with error messages
• Self-check function
• Security code protection of setpoints
• Low battery voltage alarm
• Automatic power-off
5. Printer (BT200-P00)
Printer prints out tag numbers and other parameters on the spot.
6. Intrinsic safety (Only for a without printer type)
CSA intrinsically safe approval.
Device Smart Communicator BT200 Introduction
As a portable terminal, the Model BT200 BRAIN TERMI-NAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode,and range, through simultaneous communication. It also monitors I/O values and self-check results, sets constant- current output , and allows zero adjustments.
The Model BT200 BRAIN TERMINAL is used by connecting it between 4 to 20 mA DC signal transmission lines of the equipment or to a dedicated connector on the ESC (Signal Conditioner Communication Card) when the system is started up or maintained.
Device Smart Communicator BT200 Feature
1.Online monitoring and communication
The modulated communication signal does not interrupt the 4 to 20 mA DC signals during communication.
2. Common to all Yokogawa’s equipment
The Model BT200 BRAIN TERMINAL works with allequipment that uses BRAIN communication.
3. Easy of use
A large display (21 characters by 8 lines) eases setup andalteration procedures in English prompting interactive
sequences.
4. Diagnostics/security with error messages
• Self-check function
• Security code protection of setpoints
• Low battery voltage alarm
• Automatic power-off
5. Printer (BT200-P00)
Printer prints out tag numbers and other parameters on the spot.
6. Intrinsic safety (Only for a without printer type)
CSA intrinsically safe approval.
Device Smart Communicator BT200 Specification
As a portable terminal, the Model BT200 BRAIN TERMINAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode, and range, through simultaneous communication. It also monitors I/O values and self-check results, sets constantcurrent output, and allows zero adjustments.
Feature
Online monitoring and communication
Common to all Yokogawa’s equipment
Easy of Use
Diagnostics/security with error messages
Printer (BT200-P00)
Intrinsic safety (Only for a without printer type)
EMC Conformity Standards
EN61326-1 Class A, Table2 (For use in industrial
locations), EN61326-2-3
Display:
LCD dot matrix, 21 characters
Power Supply:
Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))
For Intrinsic safety type; Five
designated batteries (see OPTIONS)
Dimensions:
BT200-N00 . . . 228*110*51 mm
(9.0*4.3*2.0 inch)
BT200-P00 . . . 321*110*61 mm
(12.6*4.3*2.4 inch)
Approximate Weight:
BT200-N00 . . . 510 g (1.12 lb)
BT200-P00 . . . 700 g (1.54 lb
• - Online monitoring and communication The modulated communication signal does not interrupt the 4 to 20 mA DC signais during communication.
• - Common to ail Yokogawa’s equipment The Model BT200 BRAIN TERMINAL Works with ail equipment that uses BRAIN communication.
• - Easy of use A large display (21 characters by 8 lines) eases setup and alteration procedures in English prompting interactive sequences.
• - Diagnostics/security with error messages
• - Self-check function
• - Security code protection of setpoints
• - Low battery voltage alarm
• - Automatic power-off
Device Smart Communicator BT200 Specification
As a portable terminal, the Model BT200 BRAIN TERMINAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode, and range, through simultaneous communication. It also monitors I/O values and self-check results, sets constantcurrent output, and allows zero adjustments.
Feature
Online monitoring and communication
Common to all Yokogawa’s equipment
Easy of Use
Diagnostics/security with error messages
Printer (BT200-P00)
Intrinsic safety (Only for a without printer type)
EMC Conformity Standards
EN61326-1 Class A, Table2 (For use in industrial
locations), EN61326-2-3
Display:
LCD dot matrix, 21 characters
Power Supply:
Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))
For Intrinsic safety type; Five
designated batteries (see OPTIONS)
Dimensions:
BT200-N00 . . . 228*110*51 mm
(9.0*4.3*2.0 inch)
BT200-P00 . . . 321*110*61 mm
(12.6*4.3*2.4 inch)
Approximate Weight:
BT200-N00 . . . 510 g (1.12 lb)
BT200-P00 . . . 700 g (1.54 lb
• - Online monitoring and communication The modulated communication signal does not interrupt the 4 to 20 mA DC signais during communication.
• - Common to ail Yokogawa’s equipment The Model BT200 BRAIN TERMINAL Works with ail equipment that uses BRAIN communication.
• - Easy of use A large display (21 characters by 8 lines) eases setup and alteration procedures in English prompting interactive sequences.
• - Diagnostics/security with error messages
• - Self-check function
• - Security code protection of setpoints
• - Low battery voltage alarm
• - Automatic power-off
-Manuals
Device Smart Communicator BT200
-Data sheet
-Manuals
Device Smart Communicator BT200
-Data sheet
Device Smart Communicator BT200 Application
Printer (BT200-P00) Printer prints out tag numbers and other parameters on the spot. Equipment Spécifications Applicable Equipment:
[Field Instruments]
DPharp
ADMAG
YEWFLO
YTA [Signal Conditioner]
Signal Conditioner for CENTUM Communication
Spécification: Yokogawa original protocol
Modulation: Burst modulation 0: 2400 Hz 1 :
Signal without carrier Baud rate: 1200bps
Communication signal: host to device: +/- 0.5 V (load résistance 250 Q) device to host: +/- 2 mA Communication Line: [Field Instruments] Load résistance: 250 to 600 Q (including cable résistance)
Load capacitance: 0.22 pF or less Load inductance: 3.3 mH or less Power line spacing: 15 cm (6 inch) or more (Avoid parallel wiring.)
Device Smart Communicator BT200 Application
Printer (BT200-P00) Printer prints out tag numbers and other parameters on the spot. Equipment Spécifications Applicable Equipment:
[Field Instruments]
DPharp
ADMAG
YEWFLO
YTA [Signal Conditioner]
Signal Conditioner for CENTUM Communication
Spécification: Yokogawa original protocol
Modulation: Burst modulation 0: 2400 Hz 1 :
Signal without carrier Baud rate: 1200bps
Communication signal: host to device: +/- 0.5 V (load résistance 250 Q) device to host: +/- 2 mA Communication Line: [Field Instruments] Load résistance: 250 to 600 Q (including cable résistance)
Load capacitance: 0.22 pF or less Load inductance: 3.3 mH or less Power line spacing: 15 cm (6 inch) or more (Avoid parallel wiring.)
Hiltech, was established in 2008 as a distributor of Industrial automation and industrial instruments and Electronic Control, Automation Products, Repair and Engineering Services. Hiltech is a leading global industrial supplier in China, specializing in process controls supplier of Test & Measurement instruments, automation control systems module and spare parts with many years.The company world`s well-known brands:Rosemount, Yokogawa, ABB, Honeywell, Fisher,Siemens,Wika ,GE,Rockwell, Foxboro, ,GE ,Yaskawa,,and so on.
