Micro Motion 2700 Multiple Variable Flow Transmitter Introduction

Micro Motion 2700 multiple variable flow transmitter is powered by MVD Technology and designed for compact integral mounting, or to easily mount on a wall or pipe stand. It simultaneously outputs multiple variables, including: mass flow rate, volume flow rate, gas standard volume flow rate, density, temperature, and drive gain in selected combinations of outputs including milliamp, frequency, and discrete I/O using HART, Modbus, FOUNDATION fieldbus, or PROFIBUS-PA digital communications. These transmitters feature a rugged Class I, Division 1 / Zone 1 housing with an optional local operator interface designed to make flow meter access easy. Flow meter commissioning is simple and straight-forward with virtually no special programming requirements.

Micro Motion 2700 Multiple Variable Flow Transmitter Feature

Maximize flexibility with integral or remote mounting
Receive diagnostics for performance under entrained gas and batching from empty applications with MVD digital processing
Lower wiring costs and install easily and quickly
Eliminate the need for additional instruments with concentration and net flow measurement
Rely on custody-transfer approval and certification for SIL2 and SIL3
Gain real-time and in-process measurement integrity assurance with Smart Meter Verification
Gain access to additional diagnostics and process information without added wiring costs with WirelessHART™
Simplify flow-meter access with rugged Class I, Division 1 / Zone 1 housing with an optional local operator interface

Micro Motion 2700 Multiple Variable Flow Transmitter Specification

Output variables
Mass & volume flow
Net product content / flow
Temperature
Density
Concentration
Local display
Standard user interface with 2-line LCD panel
Two optical switches for local operation
Glass or plastic lens options
Power
Self-switching AC/DC input, automatically recognizes supply voltage
85 to 265 VAC, 50/60 Hz, 6 watts typical, 11 watts maximum
18 to 100 VDC, 6 watts typical, 11 watts maximum
Complies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) with amendment 2, and Installation (Overvoltage) Category II, Pollution Degree 2
Input/output signals (analog output option)
Not intrinsically safe
One active 4–20 mA output
One active frequencty output
Frequency output can be configured as a discrete output
Input/output signals (configurable I/O option)
Not intrinsically safe
One or two active 4–20 mA outputs
One or two active/passive frequency outputs
One or two active/passive discrete outputs
One discrete input
Input/output signals (intrinsically safe option)
Intrinsically safe
One passive 4–20 mA output
One passive frequency output
Frequency output can be configured as a discrete output
Input/output signals (Foundation fieldbus option)
Intrinsically safe (or optionally non-incendive)
One Foundation fieldbus H1 output
Input/output signals (PROFIBUS-PA option)
Intrinsically safe
One PROFIBUS-PA output
HART/WirelessHART
Bell 202 signal is superimposed on the primary milliamp output
WirelessHART available via THUM adapter
HART communication is unavailable on Foundation fieldbus and PROFIBUS-PA transmitter versions
Mounting options
Field-mount
•Integrally mounted to a Micro Motion F-Series, R-Series, or H-Series sensor
•Remotely mounted to any 4-wire or 9-wire Micro Motion Coriolis sensor
Application types
Continuous process control
Custody transfer
Two-phase flow/entrained gas
Meter verification
SIS Certified
Hazardous approvals
Class I, Div. 1
Class I, Div. 2
Zone 1
Zone 2