+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Products » Flow Measuring Instrument » Ultrasonic Flow Meters » In Line Ultrasonic Flow Meters

In Line Ultrasonic Flow Meters

Share to:
  • No pressure loss, measurement is not affected by temperature and pressure changes.
  • Reliable empty full tube detection technology.
  • Excellent low fiow rate measurement performance, turndown ratio 100:1.
  • Both power supply and output circuit adopt reliable lightning and surge protection, with high reliability and extremely low failure rate.
Availability:
Quantity:

Inline Ultrasonic Flow Meters Introduction

Inline ultrasonic flowmeter uses the principle of ultrasonic time difference to measure flow, which can realize DN15~DN6000 pipeline flow measurement.

This series of products have the advantages of high measurement accuracy, strong anti-interference ability, stable and reliable work, and rich interfaces. Each component of the flowmeter is designed in accordance with the IP68 protection level standard, which is suitable for harsh working environments.

Inline Ultrasonic Flow Meters Feature


  • IP68 PROTECTION CLASS
    Whole machine waterproof:whole machine is sealed completely reaching IP68 protection level.
    Parts waterproof :Each part is waterproof,operating normally in the event of water inside .
  • WATERPROOF KEYBOARD
    4-key board design,support setting operation password .
  • MULTIPLE INTERFACE
    Communication interface:RS485 interface
    Output: 4-20mA analog/OCT pulse/Relay signal
    Heat measurement:achieve heat measurement by connecting 3-wired PT100 temperature transducers
    Input: 3 way 4-20mA analog input, acquisition signals of temperature, press, liquid level,etc.
  • TEMPERATURE AND PRESSURE
    Temperature range:-30℃~160℃
    P/N :0~2.5Mpa (Optional)
  • HIGH ACCURACY MEASUREMENT
    Accuracy:0.5%,1% .
  • ULTRASOUND MEASUREMENT
    No rotation, no moving parts , Long term measurement with high accuracy.
    Applicable to variety of water quality, including the water gravel and weeds.

Inline Ultrasonic Flow Meters Specification 


Description

Specifications









Main unit

Accuracy

Better than ±1%

Principle

Transit-time measuring principle

Measurement

Period

500ms

Output

Analogue output: 4-20mA or 0-20mA current output. Impedance 0~1kW. Accuracy 0.1%

Input

Three analogue input




Other functions

Automatically record the totaliser data of the last 64 days / 64 months / 5 years

The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation

The instrument working status of the last 64 days






Pipe

Material

Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed

Size

DN15-6000mm



Straight pipe section

In the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream the length must be beyond 30D from the access of the pump. (D stands for pipe diameter)




Liquid



Types

Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid

Turbidity

Less than 10000ppm, with a little bubble




-Manuals

Inline Ultrasonic Flow Meters

-Data sheet


Inline Ultrasonic Flow Meters Application

Inline type ultrasonic flow meter can be applied to a wide range of measurements. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water.

In Line Ultrasonic Flow Meters application

Previous: 
Next: