+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Products » Flow Measuring Instrument » Turbine Flow Meters » Gas Turbine Flow Meters

Gas Turbine Flow Meters

Share to:
  • Accuracy 1.5%
  • Measuring range 2.5-6000 m3/h
  • Diameter (MM) DN20-DN300
  • Range ratio 1:10 , 1:20
  • Output 4-20mA / Pulse / RS485
  • Press 1.6Mpa, Option (2.5MPa, 4.0MPa, 6.4Mpa)
  • Power 24VDC or 3.6V Lithium battery
  • Connection Flange(DN20-DN300), Thread (DN20-DN40)
  • Conditions of use
A. ambient temperature:-25 ~+80 ℃  
B. medium temperature:-20 ~+60 ℃
C. relative humidity: 5-95%
D. atmospheric pressure: 86 kpa-106 kpa
Availability:
Quantity:


Gas Turbine Flow Meter Introduction

Gas turbine flowmeter technology enables efficient measurement of many types of gases. For reliable measurement, the gas stream must be chemically compatible with the stainless steel body and internals of the meter and free of solid particles larger than dust and all liquids beyond a film.

The turbine Gas Meters are robust and designed to perform on the highest level of accuracy. All these meters is the fact they comply with all international standards and are approved for custody transfer even with smallest possible installation length.

Gas Turbine Flow Meter Features

Gas Turbine Flow Meters structure

            

    • High accuracy, good repeatability. Small pressure loss, good vibration resistance;

    • Using high-quality bearings, low friction resistance, good sealing performance and long life;

    • It integrates microprocessor, flow sensor, high-precision temperature and pressure sensor. Directly measure the flow, temperature and pressure of the measured gas. And automatically perform flow tracking compensation and compression factor correction operations;

    • The meter has pulse signal and analog signal output. It can directly realize the centralized collection and real-time management of computer data through the RS485 communication interface or the GPRS system;

    • Low power consumption, can be powered by internal battery or external power supply;

    • With real-time data storage function, it can prevent data loss when the battery is replaced or the power is suddenly lost. In the case of power failure, internal data can be stored permanently;

    • It can be used in conjunction with IC card prepayment system to facilitate trade settlement;

Gas Turbine Flow Meter Specification


Mediun :No impurity, no corrosive gas, natural gas, etc.
Precision:±1.5%, ±1.0%, ±0.5%,
Repetition:Better than 0.1%
Traffic Range:6.5~6500m³/h
Display content:instantaneous working conditions, volume, standard volume, temperature, pressure, battery capacity, etc.
Calibre measurement:DN50-DN300
Connection mode:Flange connection
Power supply:Battery or external power supply operation
Output:Pulse signal output, 4-20mA current output, RS485 communication GPRS remote communication



-Manuals

Gas Turbine Flow Meter

-Data sheet


Gas Turbine Flow Meter Application

Gas turbine flowmeters are mainly used for gas flow measurement in industrial pipelines.



Flow measurement of air, nitrogen, oxygen, hydrogen and other media fluids.


When measuring the volume flow under working conditions, it is hardly affected by the fluid density, pressure, temperature, viscosity and other parameters.


Previous: 
Next: