Vertical Turbine Fire Pump have submerged impellers contained in a series -bowl assembly at the bottom of a vertical shaft. The design is similar to pumps used extensively for industrial and municipal service.
These pumps are UL & FM approved for discharging water from lakes, streams, open sumps, drilled wells and other equivalent subsurface sources. each pump consists of a discharge head, motor stand, column pipe, line shaft, bowl assembly and suction strainer.
With advanced hydraulic design and structure, adopting ashland process to make impeller blade, adopting epoxy coating process in impeller vane, and reasonable selection of materials to make the products have an excellent performance and long service life.
Whirl sand device and maze-like structure make the sand unable to enter the bearings.
Impeller shaft and motor shaft both adopt the bronze bearing as theri supporting. The radial run-out of the shaft is less than 0.13mm which meets US standard. These make the pump have a smooth and reliable operation and low noise.
The discharge head has a beautiful shape and big window. It's convenient to repair and replace the gland.
Material from ductile iron GGG60, SS304 or SS316 for optional.
UL listed and FM approved pump for suction lift conditions
Minimal maintenance
Can be used where city water is not available and ponds or lakes are the only water supply
Construction materials for seawater service are available
Performance Range
Capacity: 40-1260m⊃3;/h
Rated pressure: 1.5Mpa
When punping clean water or physical and chemical liquid: Neutral water, PH=6.5-8.5, chloride ion content:=400mg/L, medium temperature:=40ºC
Material of Vertical Turbine Fire Pump
Bowl: Cast iron, Stainless steel
Shaft: Stainless steel
Impeller: Cast iron, Bronze or Stainless steel
Discharge head: Cast iron or carbon steel
NO. | Pump Model / Outlet Size / Min Submergence | Flow | Head | |
(usgpm) | (psi) | (m) | ||
1 | 100VTP40~6 Outlet Size 4" Min Submergence | 100 | 40~270 | 28~190 |
150 | 40~263 | 28-185 | ||
200 | 40~259 | 28~182 | ||
250 | 40~253 | 28~178 | ||
2 | 150VTP200~17 Outlet Size 6" Min Submergence | 500 | 40~213 | 28~150 |
750 | 40~182 | 32~24 | ||
500 | 40~230 | 28~162 | ||
750 | 45~188 | 44~32 | ||
3 | 200VTP250~22 Outlet Size 8" Min Submergence | 750 | 55~288 | 50.8~40 |
1000 | 50~267 | 36~188 | ||
750 | 40~263 | 28~185 | ||
1000 | 40~249 | 28~175 | ||
4 | 250VTP400~28 Outlet Size 10" Min Submergence 151cm | 1250 | 41~305 | 28~214 |
1500 | 40~292 | 28~205 | ||
1500 | 58~285 | 40~200 | ||
2000 | 63~251 | 44~176 | ||
5 | 250VTP550~26 Outlet Size 10" Min Submergence 171cm | 2000 | 40~194 | 28~185 |
2000 | 57~266 | 40~187 | ||
2500 | 61~245 | 43~172 | ||
6 | 300VTP860~43 Outlet Size 12" Min Submergence 180cm | 2500 | 50~245 | 35~172 |
3000 | 53~235 | 37~165 | ||
7 | 350VTP860~43 Outlet Size 12" Min Submergence 180cm | 2500 | 74~236 | 52~166 |
3000 | 69~230 | 48.5~162 | ||
3500 | 73~222 | 51~156 | ||
4000 | 104~207 | 73~145 | ||
8 | 350VTP1250~36 Outlet Size 14" Min Submergence 250cm | 3500 | 48~250 | 34~176 |
4000 | 46~244 | 33~172 | ||
9 | 400VTP1250~36 Outlet Size 16" Min Submergence 250cm | 4000 | 61~270 | 43~190 |
4500 | 60~264 | 42~186 | ||
5000 | 253 | 178 |
Standards
NFPA20, UL, FM, EN12845,CCCF
Performance Ranges
UL : Q: 250-5000GPM H:80-300PSI
FM: Q: 250-5000GPM H:80-300PSI
CCCF: Q:15-300L/S H:0.60-2.0Mpa
NFPA20: Q: 250-5000GPM H:80-300PSI
-Manuals
Vertical Turbine Fire Pump
-Data sheet
Stainless steel
Duplex and Super Duplex
Nickel-Aluminum-Bronze
Special materials available on request
FIRE MARKET APPLICATIONS
Sprinkler systems
Hydrant systems
Water curtains