SITRANS LR460 is for challenging solids applications. For extremely low dielectric, low density powders, the 25 GHz SITRANS LR460 is the preferred solution. Featuring a horn antenna with an 8-degree beam, this 4-wire FMCW device has proven itself in thousands of applications.
SITRANS LR460 provides excellent results even during conditions of extreme dust. The integral Easy Aimer included on the SITRANS LR460 allows for easy positioning for optimum measurement on solids.
An optional dust cap is available for sticky solids. Optional air purging is also available for extremely sticky applications.
Safe on-site local programming is simple using the Intrinsically Safe handheld programmer. SIMATIC PDM can be used for easy remote programming using HART or PROFIBUS PA.
Process Intelligence – advanced echo processing for reliable performance
Intrinsically safe infrared handheld programmer
Extremely high signal yields high performance (high signal-to-noise ratio)
Quick Start Wizard for setup
Range | 100 m (328 ft) |
---|---|
Process Temperature | -40 to 200 °C (-40 to 392 °F) |
Process Pressure | 0.5 bar g (7.25 psi g) |
Communications or Outputs | mA/HART or PROFIBUS PA |
Options | Dust cap for sticky solids Air purging for sticky applications |
Key Applications | Long-range dusty applications, cement powder, fly-ash, coal, flour, grain, plastics |
| 7ML5426 SITRANS LR460 Radar level transmitter with horn: continuous, non-contact, 100 m (328 ft) range, for challenging solids applications. |
-Manuals
SITRANS LR460 Radar Level Transmitter
-Data sheet