Micro Motion 2700 Field And Integral-Mount Multivariable Flow And Density Transmitter

Micro Motion 2700 Multiple Variable Flow Transmitter Introduction

Micro Motion 2700 multiple variable flow transmitter is powered by MVD Technology and designed for compact integral mounting, or to easily mount on a wall or pipe stand. It simultaneously outputs multiple variables, including: mass flow rate, volume flow rate, gas standard volume flow rate, density, temperature, and drive gain in selected combinations of outputs including milliamp, frequency, and discrete I/O using HART, Modbus, FOUNDATION fieldbus, or PROFIBUS-PA digital communications. These transmitters feature a rugged Class I, Division 1 / Zone 1 housing with an optional local operator interface designed to make flow meter access easy. Flow meter commissioning is simple and straight-forward with virtually no special programming requirements.

Micro Motion 2700 Multiple Variable Flow Transmitter Feature

• Maximize flexibility with integral or remote mounting

• Receive diagnostics for performance under entrained gas and batching from empty applications with MVD digital processing

• Lower wiring costs and install easily and quickly

• Eliminate the need for additional instruments with concentration and net flow measurement

• Rely on custody-transfer approval and certification for SIL2 and SIL3

• Gain real-time and in-process measurement integrity assurance with Smart Meter Verification

• Gain access to additional diagnostics and process information without added wiring costs with WirelessHART™

• Simplify flow-meter access with rugged Class I, Division 1 / Zone 1 housing with an optional local operator interface

Micro Motion 2700 Multiple Variable Flow Transmitter Specification 

• 
  

• Output variables

• Mass & volume flow
  Net product content / flow
  Temperature
  Density
  Concentration
  

• Local display

• Standard user interface with 2-line LCD panel
  Two optical switches for local operation
  Glass or plastic lens options
  

• Power

• Self-switching AC/DC input, automatically recognizes supply voltage
  85 to 265 VAC, 50/60 Hz, 6 watts typical, 11 watts maximum
  18 to 100 VDC, 6 watts typical, 11 watts maximum
  Complies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) with amendment 2, and Installation (Overvoltage) Category II, Pollution Degree 2
  

• Input/output signals (analog output option)

• Not intrinsically safe
  One active 4–20 mA output
  One active frequencty output
  Frequency output can be configured as a discrete output
  

• Input/output signals (configurable I/O option)

• Not intrinsically safe
  One or two active 4–20 mA outputs
  One or two active/passive frequency outputs
  One or two active/passive discrete outputs
  One discrete input
  

• Input/output signals (intrinsically safe option)

• Intrinsically safe
  One passive 4–20 mA output
  One passive frequency output
  Frequency output can be configured as a discrete output
  

• Input/output signals (Foundation fieldbus option)

• Intrinsically safe (or optionally non-incendive)
  One Foundation fieldbus H1 output
  

• Input/output signals (PROFIBUS-PA option)

• Intrinsically safe
  One PROFIBUS-PA output
  

• HART/WirelessHART

• Bell 202 signal is superimposed on the primary milliamp output
  WirelessHART available via THUM adapter
  HART communication is unavailable on Foundation fieldbus and PROFIBUS-PA transmitter versions
  

• Mounting options

• Field-mount
  •Integrally mounted to a Micro Motion F-Series, R-Series, or H-Series sensor
  •Remotely mounted to any 4-wire or 9-wire Micro Motion Coriolis sensor
  

• Application types

• Continuous process control
  Custody transfer
  Two-phase flow/entrained gas
  Meter verification
  SIS Certified
  

• Hazardous approvals

• Class I, Div. 1
  Class I, Div. 2
  Zone 1
  Zone 2

-Manuals

Micro Motion 2700 Multiple Variable Flow Transmitter

-Data sheet