The inline or in-line flow meter includes a flow body installed more permanently in a process line. One of the in-line meter advantages is that it does not require as much of a straight run as the insertion-style meter. This meter configuration has a built-in flow conditioner that optimizes the flow profile of the process gas. This allows the end-user to cut down the length of the upstream straight run to three pipe diameters, in most cases.
Easy maintenance due to no moving parts.
Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.
Uninfluenced by temperature, pressure, viscosity, and density.
Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.
High turndown ratio up to 1:100.
It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit.
Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.
Lining and electrode available in various materials which can measure nearly all conductive fluids.
It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.
The power supply system has good voltage vibration ability.
Meters batching and blending totalization.
| Accuracy | ±0.5%, ±0.3% Optional | ||
| Repeatability | 0.15% | ||
| Ambient Temperature | Sensor (Remote Type) | -4 °F to 158 °F (-20 °C to +70 °C) | |
| Converter | -4 °F to 158 °F (-20 °C to +70 °C) | ||
| Integral Type | 14 °F to 122 °F (-10 °C to +50 °C) | ||
| Humidity | 5% to 95% RH (no frost) | ||
| Vibration Frequency | 55Hz | ||
| Amplitude | 0.55mm | ||
| Ambient Magnetic Field | ≤400A/m | ||
| Fluid Temperature | Direct Mount | ≤176°F (80°C) | |
| Separate Type | Rubber Lining | ≤176°F (80°C) | |
| PTFE Lining | ≤248°F (120°C) | ||
| Nominal Pressure | Limited to Flange Rating | ||
| Power Supply | 18 to 36VDC, 85 to 220VAC | ||
| Enclosure | IP65 | ||
| Output Signal | Pulse and 4 to 20 mA | ||
| Digital Communication | Modbus, RS485 or HART | ||
| Electrode Material | 316SS or Hastelloy C and Specials | ||
| Lining Material | PTFE or Hard Rubber | ||
| Flange Material | Carbon Steel, Stainless Steel and Specials | ||
| Measuring Tube Material | Stainless Steel, Hastelloy C and Specials | ||
-Manuals
In Line Magnetic Flow Meter
-Data sheet
HVAC hydronic applications including chilled water, heating hot water and condenser water • Bi-directional flow for primary/secondary bypass and thermal storage applications • Domestic cold and hot water applications • Clean process flow applications with conductivities greater than 5 µS/cm