Honeywell STD700 Smartline® smart pressure transmitters are modular differential pressure transmitters aimed at economic industrial process applications. Of traditional 54mm centers, kidney flange design with a range of wetted and non wetted material options, the Smartline® STD700 differential pressure transmitters are suited to a wide range of industrial process control applications.
Automatic static pressure & temperature compensation
Response times as fast as 100ms
Easy to use and intuitive display capabilities
Intuitive External Zero, Span and configuration
capability
On-board diagnostic capabilities
Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
World class overpressure protection
Full compliance to SIL 2/3 requirements.
Modular (may be added or removed in the field)
Supports HART protocol variant
0, 90,180, & 270 degree position adjustments
Configurable (HART only) and standard (Pa, KPa, MPa, KGcm2, Torr, ATM, inH2O, mH2O, bar, mbar, inH2O, inHG, FTH2O, mmH2O, mm HG, & psi) measurement units.
Supports Flow engineering units
2 Lines 6 digits PV (9.95H x 4.20W mm) 8 Characters
Square root output indication (√) and Write Protect
Indication
Built-in Basic Device Configuration through Internal or
External Buttons-Range/Engineering Unit/Loop Test /Loop Calibration/Zero /Span Setting
Model | URL "H2O (mbar) | LRL "H2O (mbar) | Max Span "H2O (mbar) | Min Span "H2O (mbar) |
STD720 | 400 (1000) | -400 (1000) | 400 (1000) | 4 (10) |
Mode | psi (bar) | psi (bar) | psi (bar) | psi (bar) |
STD730 | 100(7.0) | -100(-7.0) | 100 (7.0) | 1 (0.07) |
STD770 | 3000 (210) | -100(-7.0) | 3000 (210) | 30 (2.1) |
Net Weight | 8.3 pounds (3.8 Kg) |
Rangeability | Up to 1001 |
Brand | Honeywell |
Model Number/Name | STD700 |
Accuracy | Up to 0.065% |
Stability | Up to 0.025% |
Supply Voltage | 10.8 to 42.4 Vdc at terminals |
Load Resistance | 0 to 1,440 ohms |
Response times | 100ms |
Operating temperature | -20 to +70 deg C |
Supply Voltage Effect | 0.005% span per volt. |
Process Connections | 1/4- NPT or 1/2- NPT with adapter (meets DIN requirements) |
Wiring | Accepts up to 16 AWG (1.5 mm diameter) |
Housing material | Aluminum |
Voltage | 10.8 to 42.4Vdc at terminals |
Minimum Load | 0-250 ohms |
-Manuals
STD700 Smartline Differential Pressure Transmitter
-Data sheet