Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor on/off & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.
Field-adjustable; settings and circuit
Select contact arrangements
Size: 4″ (100 mm)
Accuracy: 1.0% of full scale (ASME B40.100 Grade 1A)
Case and ring: 304 Stainless Steel matte finished
Lens: Polycarbonate dome
Wetted parts: 316 Stainless Steel
Operating Temperature: Ambient: -20 to 60°C (-4°F to 140°F)
Process fluid: max 60°C (140°F)
Dial: Aluminum with black & red markings
Pointer: Black aluminum
Connection: 1/4″ or 1/2″ NPT or BSP bottom
Ranges: Vacuum to 15,000 psi/Bar
Protection degree: IP65
Switch: 1 NO contact
Pressure Range Selection
Single Scale
kg/cm2 or bar
0-4
0-6
0-10
0-16
0-25
0-40
0-60
0-100
0-160
0-250
0-400
0-600
0-1000
Compound Ranges
-1x3
-1x5
-1x9
-1x15
-1x24
Other Units: psi, Kpa, Mpa also available
Custom Ranges also available
-Manuals
Electric Contact Pressure Gauge
-Data sheet
Electric Contact Pressure Gauge is widely used in automatic controlling of devices and electromechanical equipments in many industries such as petroleum, chemical industry, power station, and metallurgy.
Process Market:
Oil and GasRefineries
Chemical and Petrochemical
Water and Wastewater
Power Plants
Process Applications:
Biogas and Biodiesel