+86-182-9191-0663 丨  sales@hiltechgroup.com | support@hiltechgroup.com

About Us

Since 1998 丨 HILTECH®

You are here: Home » Brands » ABB » ABB Temperature Transmitters » ABB TTH200 Head Temperature Transmitter

ABB TTH200 Head Temperature Transmitter

Share to:
  • HART Compatability
  • ATEX, IECEx, Zone 0 Compliance
  • The TTH200 meets all requirements for the CE mark in accordance with IEC 61326 (2006)
  • Conforms with IEC 61508 as regards use in safety-related applications, up to and including SIL 2.
Availability:
Quantity:

TTH200 Head Mounted Temperature Transmitter Introduction

ABB TTH200 Head Mounted Temperature Transmitter is designed for standard type B sensor heads. The temperature transmitter is provided for all HART standard applications in temperature measurement with a single sensor. The ABB TTH 200 temperature transmitter can support the functionality as same as ABB TTH 300 Temperature Transmitter but the difference is that without sensor drift and sensor redundancy monitoring that can be configured via any standard FTD tool via EDD or FDT / DTM in DAT200 (Asset Vision Basic).

The TTH200 is provided for all HART standard applications in temperature measurement with one sensor input. The transmitter follows NAMUR Recommendations such as NE 89 and NE 107. The TTH200 supports the same functionality as the TTH300, but without sensor redundancy and sensor drift monitoring. As an option, an LCD indicator can be connected.
The transmitter can be configured with ABB-tools such as Field Information Manager (FIM), with DAT200 (Asset Vision Basic) via DTM, with a Handheld via EDD, or with any standard tool using FDI-/FDT-Technology.

TTH200 Head Mounted Temperature Transmitter Feature

  • Universal sensor input
    – RTD, thermocouple, Ω, mV

  • Functional safety SIL 2 / SIL 3 in accordance with IEC 61508

  • Various sensor error-calibration possibilities
    – One point, two point, Callendar-van Dusen, freestyle characteristics with 32 supporting points

  • Output signal
    – 4 to 20 mA, HART 5 and HART 7 (switchable)

  • Accuracy 0.1 %, long-term stability 0.05 % per year

  • Wire break / corrosion monitoring in accordance with NE 89

  • Device status signaling and freely configurable diagnostic categorization with diagnostic history according to NE 107

  • Event monitor for logging critical events

  • Configuration monitor for configuration changes

  • Turnable LCD indicator for optimal readability (option)

  • Approvals for explosion protection
    – ATEX, IECEx, zone 0
    – FM / CSA
    – EAC, EAC-Ex
    – NEPSI

TTH200 Head Mounted Temperature Transmitter Specification 

Model NoTTH 200
OutputStandard: 4 to 20 mA; Configurable: 20 to 4 mA
Cable ConnectionMaximum sensor line resistance (RW) for each line: 1.5 kΩ, total: 3 kΩ
Storage Temperature-50 to 85 °C
Electrical ConnectionElectrical connection Terminals (captive screws) incl. soldering tags
InputResistance RTD Pt-100, Thermocouples B,E, J, K, N, R,S, T, Voltages, mV Voltages
Voltage-125 to 125 mV; -125 to 1100 mV
Ambient TemperatureStandard: -40 to 85°C; Optional: -50 to 85°C
Electrical Interface3.5 kV DC (approx. 2.5 kV AC) 60 s, input to output
Vibration Resistance10 to 2,000 Hz at 5g in acc. with IEC 60068-2-6, during operation and transport
Input resistance> 10 MΩ
DisplayStandard Supply Without Display
Warm-up Time5 minutes
Power Supply11 to 42 VDC
HousingPolycarbonate
CommunicationHART protocol
CalibrationProvided alongwith and valid for 1 year, traceable to National Standards.
Weight50 Grams


-Manuals

ABB TTH200 Head Mounted Temperature Transmitter

-Data sheet


Previous: 
Next: